🟩 Step 1 — Connect to the Charger’s Local Wi-Fi Network

  • Put your smartphone or tablet into Airplane Mode.

  • Reboot the charger’s power using the isolator/breaker.

  • Wait for the status light to flash green — this means the configuration network is ready.

    • ⚠️ Network access is only available for 15 minutes after reboot.

  • Turn on your phone’s Wi-Fi and connect to the charger’s network:

    • Network name begins with SN100… (matches the serial number on the charger).

  • Enter the Wi-Fi password:

    • Cord One: admin123

    • Cord Zero: Enter the installation PIN

      • If forgotten: hold reset button 15 seconds → resets to original Wi-Fi password (on sticker/manual).

  • If asked whether to auto-switch to a better network → Select No / Reject.