Reboot your digital box by holding down the power button for 10 seconds, then try repeating the instructions
When wirelessly pairing a digital box to a TELUS WiFi Hub, T3200M or wireless access point, confirm that you have held the pairing button on the access point or modem for at least 10 seconds (then let go)
Confirm that the Optik TV Wireless Digital Box is connected to the back of your TV using the HDMI cable provided and that you have selected the corresponding HDMI input on your TV using your TV manufacturer’s remote. You should have at least 4 bars appearing in the green Wi-Fi indicator light on the front of the wireless digital box after set-up. If you do not have a sufficient connection, try moving the box closer to your TELUS Internet modem
If you are prompted to enter an activation code during set-up (not normally required), you can find this code at the top of your order confirmation email (subject line: Confirmation of changes to your TELUS account)
If you would like to pair your Optik TV remote with your TV to control power and volume, please visit Program your remote for instructions
If you have a wireless access point either in your kit or at home, confirm it is connected to the TELUS Internet modem using an Ethernet cable. It should also be connected to power, and the switch on the back should be in the AP position

Which type of equipment would you like to self-install?